Name	Filter	Units	Description
Number of Cavities	6 12 24 48 96 384 1536		number of cavities
Number of Columns			number of columns
Number of Rows			number of rows

Name	Filter	Units	Description
Labware width		mm	Width (e.g. distance between J and H in the picture (see ’Remarks’ column in the row above))
Labware length		mm	Width (e.g. distance between F and G in the picture (see ‘Remarks’ column))
Labware height		mm	Distance, in millimeters, from the bottom surface of the labware to the top surface of the labware
Stacking height		mm	The distance, in millimeters, from the bottom surface of the labware to the top surface of the labware
Lidded height		mm	Height of the labware with a lid / cover in place. Available only if Can have lid? is selected.
Lid resting height		mm	Height above the bottom of the labware at which the bottom of a lid / cover rests.
Lid departure height		mm	Height above the bottom of the labware to which the lid / cover has to be lifted.
Lidded stacking height		mm	Stacking height of the labware with the a lid / cover in place. Available only if 'Can have lid?' is selected.
Sealed height		mm	Height of the labware with a seal in place. Available only if 'Can be sealed?' is selected.
Sealed stacking height		mm	Stacking height of the labware with the a seal in place. Available only if 'Can be sealed?' is selected.
Lid gripper offset		mm	Height above the lid / cover resting height at which to grip the lid / cover.

Name	Filter	Units	Description
Cavity Depth		mm	Distance from the top to the bottom of the cavity, in millimeters.
Cavity Top Diameter		mm	Diameter of cavity at top end, in millimeters.
Cavity Bottom Diameter		mm	Diameter of cavity at bottom end, in millimeters.
Cavity Volume		ul	Maximum capacity / volume of fluid for one tip, tube or well, in microliters.
Cavity Working Volume		ul	Maximum working volume of fluid for one tip, tube or well, in microliters.

Name	Filter	Units	Description
Cavity Geometry	1 2		Cavity shape. Round (1) Square (2)
Cavity Bottom Shape	1 2 3		Shape of the bottom of the cavity. Rounded (1) Flat (2) V-Shaped (3)
Cavity Bottom Area		cm^2	Area of the bottom of the cavity.
Cavity Bottom Elevation		mm	Distance from the top to the bottom of the cavity, in millimeters.
Cavity Bottom Thickness		mm	Thickness of the bottom of the cavity, in millimeters.

Name	Filter	Units	Description
Distance to first column x		mm	Distance from the left edge of the plate / rack to the center point of the cavities in the first column
Distance to first row y		mm	Distance from the front edge of the plate / rack to the center point of the cavities in the first row
Row distance between cavities		mm	Distance between cavities (cavity-center to cavity-center) in the x-direction, in millimeters. This setting should be 9mm for standard 96-well plates and 4.5mm for standard 384-well plates.
Column distance between cavities		mm	Distance between cavities (cavitycenter to cavity-center) in the y direction, in millimeters

Name	Filter	Units	Description
Notch NW	YES NO		North West corner
Notch NE	YES NO		North East corner
Notch SW	YES NO		South West corner
Notch SE	YES NO		South East corner

Name	Filter	Units	Description
Can be sealed	YES NO		Select if the labware can be sealed.
Can mount	YES NO		Select if the labware can be placed on top of another labware.
Can be mounted	YES NO		Select if another labware can be placed on top of this labware.
Robot gripper offset		mm	Height of the gripper above any teachpoint when the robot is picking or placing labware of this type.
Mobile	YES NO		Labware can be transported using robot.
Bar code offset long side		mm	Select if the labware has a thick skirt and must be adjusted. This allows to place the bar code above the pinchbar.
Bar code offset short side		mm	Select if the labware has a thick skirt and must be adjusted. This allows to place the bar code above the pinchbar.
Can have lid	YES NO		Select if the labware can have a lid / cover.

Name	Filter	Units	Description
3DImage			3dimensional image for viewing the labware
Max Temperature			Maximal operating temperature of labware in Celsius
Min Temperature			Minimal operating temperature of labware in Celsius.
Refractive index			For use with optical measurements.
Weight			Labware weight in milligrams.
Weight Tolerance		%	Labware weight tolerance in percent.
Max Storage Temperature			Maximal labware storage temperature.
Min Storage Temperature			Minimal labware storage temperature.
Technology Support			Supports specific technologies.
Material			Plastic material. PP (1) PS (2) COP (3) COC (4) ABS (5) PE (6) LD-PE (7) HD-PE (8) PC (9) Glass (10)
Surface Treatment			Cavity surface treatment Non-treated (1) Cell Culture (2) Poly-D-Lysine (3) PolySorp (4) MaxiSorp (5) MediSorp (6) MultiSorp (7) Collagen 1 (8) Amino (9) Streptavidin (10) Nickel Chelate (11) Glutathione (12) NucleoLink (13)
Sterility			Select if labware is sterile Yes (1) No (0)
Color			Labware color neutral (1) black (2) white (3) brown (4) red (5) yellow (6) green (7) blue (8) violet (9)